Single Screw barrel of Extruder

Screw & Barrel For Single Screw Extruder Suppliers Details

The Screw & Barrel For Single Screw Extruder are optional, including the ordinary type, gradient type, mutant type, barrier type, pin type, DIS open airflow type, vented type, BM type, separate type screw, etc. The compression ratio can be manufactured according to customers’ requirements. The screws can be designed to be long or single head and the barrels can be the slotted forced feeding system and so on.

Base material:：

1)38CrMoAlA(JIS SACM645)

Material composition analysis：

C: 0.35～0.42     Si: 0.20～0.45     Mn: 0.30～0.60      S: ≤0.035         P: ≤0.035  Cr:1.35～1.65    Al: 0.70～1.10 　Ni: ≤0.030 　Cu: ≤0.030 　 Mo:0.15～0.25

2）42CrMo

3）SKD61

Treatment process

Tempering, qualitative treatment

Nitriding process

Spraying alloy

Technical parameters:

Tempering hardness：HB260-290

Nitriding depth: 0.50mm-0.80mm

Nitriding hardness: 900-1000HV

Nitriding brittleness: <= level 1

Surface roughness: Ra 0.32

Screw straightness: 0.015mm

Alloy layer thickness：2-3mm

Alloy layer hardness：HRC58-65